Raised-panel steel
Carriage house
Modern flush
Full-view glass
LiftMaster openers
Chamberlain openersFull 25-point door and opener safety check with every visit - springs, cables, rollers, tracks, and your LiftMaster or Chamberlain opener included
You get a price before we start. It does not change when the pro arrives.
Get your free estimateStyles & brands we work with
- Raised-panel steel
- Carriage house
- Modern flush
- Full-view glass
- LiftMaster openers
- Chamberlain openers
See the difference
Before
After
Before
After
Before
AfterHow Much Does Panel Replacement Cost in Pungo?
Panel replacement in Pungo typically costs $250 – $500 for a single section, including the new panel and labor. A single damaged panel is the most common garage door repair we see, and it’s usually the least expensive way to get a door looking and working right again. The written estimate sets the final price, and that estimate is free.
Most homeowners in Pungo call us because one panel took a hit from a car, a bicycle, or a stray ball, and the rest of the door is fine. Replacing that one section costs far less than a new door, and it keeps the door you already have. We work on the brand you already own, so there’s no need to match a specific manufacturer before you call.
Key Takeaways
- Typical panel replacement in Pungo runs $250 – $500 for one section.
- Multiple panels, specialty glass, and discontinued styles push the price toward the top of that range and sometimes above it.
- Panel work is often bundled with panel replacement of adjacent sections when the damage spread.
- Free estimates, and we answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
- A trained specialist should always handle the springs and cables that hold the panels up.
Panel Replacement Cost Breakdown (2026)
Here’s what the individual pieces of a panel replacement job typically run in the Pungo market. These are estimated ranges for a standard residential door. Your written estimate is the number that counts.
| Line Item | Typical Estimated Range |
|---|---|
| Single standard steel panel (section only, plus labor) | $250 – $500 |
| Panel replacement, full job | $250 – $500 |
| Garage door repair (broader repairs that include panel work) | $150 – $600 |
| Track realignment (often needed after impact) | $120 – $240 |
| Roller replacement (done alongside panel work) | $110 – $220 |
| Cable repair (if the impact stressed a cable) | $130 – $250 |
| Spring repair, one spring (if the balance is off) | $180 – $340 |
| Opener repair (if the opener was strained by a binding door) | $120 – $320 |
| New door installation, for comparison | $700 – $2200 |
That last row matters. When several panels are damaged, or the door is old enough that replacement panels no longer match, a full new door can make more sense than piecemeal repairs. We’ll tell you which one you actually need, and we won’t push a new door when a panel swap gets you back up and running today.
Spring repair prices are for one spring. A matched pair is usually replaced together, so a pair costs about twice that range. If your door uses two springs and both are worn, that’s a separate conversation from the panel itself.
What pushes the price up
More than one damaged panel is the biggest factor. Each additional section adds to the total, so a two-panel job lands higher than the single-panel range. Beyond that, panel style and material matter. A basic raised-panel steel section is at the low end. A carriage-house style, a window panel, or a wood-look section with a special finish sits at the top of the range, sometimes above it if the manufacturer has to produce the section to order. Discontinued door lines are their own case: matching an old profile can mean a custom order or a decision to replace the whole door.
What keeps the price down
A single standard panel in a current production line is the least expensive scenario, and it’s also the most common. Labor is straightforward once the door is safely supported, and the job is usually finished the same day. If your door is a common brand like Clopay, Amarr, or Wayne Dalton, matching a replacement section is usually a matter of ordering the right part rather than fabricating one.
What Affects Panel Replacement Pricing in Pungo
Pungo is a rural corner of Virginia Beach, and that shapes a few things about how panel work goes here. Long driveways, detached garages, and outbuildings are common, and the doors on those structures take different abuse than a door on an attached city garage. Here’s what moves the price:
- Door style and panel profile. A standard raised-panel section costs less than a carriage-house, long-panel, or windowed section. The more complex the stamping and the finish, the higher the cost, because the part itself costs more and installation takes longer.
- Number of panels. One panel is the base range. Two or more sections add up quickly, and a door with damage spanning the width is sometimes a replacement decision rather than a repair.
- Brand and availability. We service LiftMaster, Chamberlain, Genie, Clopay, Amarr, Wayne Dalton, Craftsman, and Raynor equipment, and we’re fluent in all of them. A current-production panel from one of these lines is easy to source. An older or discontinued profile may need a custom order.
- Damage below the surface. A panel that took a hard hit often bends a track or strains a hinge or roller. Track realignment and roller replacement are modest line items, but they need to be part of the job or the new panel won’t sit or travel correctly.
- Condition of the springs and cables. A door that was struck by a car sometimes has a stressed cable or an unbalanced spring. Those are safety-critical parts and are priced separately. Springs are the most dangerous part of any garage door system, and we handle them with professional-grade tools and proper safety protocols rather than a DIY shortcut.
- Access and structure. A detached garage at the end of a long rural driveway, or a door on an outbuilding with an unusual opening height, can add time to the job. It’s worth mentioning the setup when you call so the estimate reflects it.
How to Save on Panel Replacement
The best way to keep panel replacement affordable is to fix the panel before secondary damage sets in. A bent section that rubs the track or binds a roller turns a simple panel swap into a bigger repair. Here’s how to hold the cost down:
- Address impact damage promptly. A panel that’s dented but still moving freely is a straightforward replacement. Wait until the door starts to bind and you’re adding track and roller work.
- Replace only what’s damaged. If one panel took the hit and the rest are sound, one panel is the answer. Don’t let anyone talk you into a full door for a single dent.
- Stay with a current production panel if you can. Matching a standard section from a brand that’s still in production keeps the part cost and lead time down. Custom and discontinued sections cost more.
- Bundle small items into one visit. If the rollers are worn or the track is slightly out, having those handled during the panel job saves a second visit later.
- Get the free estimate in writing. A clear written estimate is free, and it’s the number that sets the final price. Call (855) 683-7570 and we’ll walk through what your door actually needs.
Our technicians have up to 8 years of experience, and every one of them works on garage doors and nothing else. That single-trade focus is why a panel replacement here is a diagnostic conversation first. We look at the whole door, not just the dented section, and we tell you whether a repair or a full replacement is the smarter move. One call, one specialist.
If your garage door problems go beyond a single panel, the broader Garage Door Repair Pungo service covers tracks, cables, openers, and everything else that keeps the door moving.
FAQs – Panel Replacement Cost
How much does it cost to replace one garage door panel in Pungo?
One standard panel runs $250 – $500 in Pungo, including the section and labor. The exact figure depends on the panel style, the brand, and whether any track or roller work is needed alongside it. Call (855) 683-7570 for a free estimate, since the written quote sets the final price.
Is it cheaper to replace a panel or the whole door?
A single panel replacement at $250 – $500 is far cheaper than a new door installation at $700 – $2200. That holds as long as one section is damaged and the rest of the door is structurally sound. When two or more panels are damaged, or the door line is discontinued, the math can shift toward replacement. We’ll tell you which one you actually need.
Can you match my garage door panel color and style?
Usually, yes. We service Clopay, Amarr, Wayne Dalton, Raynor, and other major brands, so a current-production panel can often be matched to your existing door. Older and discontinued profiles sometimes require a custom order, which sits at the top of the $250 – $500 range or above it. Call (855) 683-7570 and we’ll confirm what’s available for your door.
Can you replace a damaged panel the same day?
Same-day service is possible when the replacement panel is a common size and style that’s in stock. Specialty or discontinued panels may need to be ordered, which adds a few days. Call (855) 683-7570. We answer 24/7, and fast dispatch runs from 7am to 7pm, Sunday through Friday.
Does panel replacement include the springs and cables?
No, springs and cables are priced as separate repairs. Spring repair runs $180 – $340 for one spring, and a matched pair costs about twice that. Cable repair runs $130 – $250. Both are safety-critical, and we only handle them with the proper tools and protocols. Call (855) 683-7570 for an exact quote, and estimates are free.
What if my door won’t open after the panel was damaged?
A door that won’t move after impact often has a bent track or a strained cable, which adds $120 – $240 for track realignment or $130 – $250 for cable repair to the panel job. Don’t force it. Call (855) 683-7570 and we’ll get a specialist out to assess the whole door.
Do you work on older or discontinued garage doors?
Yes. We work on the brand you already own, including older Clopay, Amarr, Wayne Dalton, and Raynor doors. If the exact panel is no longer made, we’ll lay out the realistic options: a custom section, a close-match panel, or a full replacement. Call (855) 683-7570 and we’ll give you an honest answer.
Panel replacement is often the smallest repair on the list, and it’s the one that restores your door’s look and function fastest. Whether it’s a repair or a full replacement, we’ll tell you which one you actually need. For urgent situations where a damaged door is a security or access problem, we offer emergency garage door service so you’re not left open. Call (855) 683-7570 for a free estimate. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
Pricing reflects the Pungo market as of 2026. Garage Door Repair Pungo offers free estimates – call (855) 683-7570.
What Our Customers Say
"Spring snapped at six in the morning with my car sealed inside and me due at work. Somebody was here by eight thirty and had it fixed that morning. Door's quieter now than it was before it broke."
- Adam Brooks"Logic board on a 15 year old opener. He was upfront that a new opener would cost less than the board plus labor, and he wasn't wrong. No pressure either way."
- Alicia Bryant"The old chain drive sounded like a freight train through the bedroom above the garage. Went with the belt drive they recommended and now I genuinely cannot hear it open from upstairs."
- Michelle Doyle